Advanced Beam & Block Fibre Reinforced Concrete Topping

Beam & Block Reinforcement

CEMEX Advanced Beam & Block products are manufactured in accordance with BS EN ISO 9001. It is independently certified under the Quality Scheme for Ready Mixed Concrete (QSRMC) in accordance with the relevant standards and available from CEMEX plants throughout the UK.

Both solutions incorporate BBA approved fibres that meet the performance requirements of the NHBC and comply with BS EN 14889. The reinforcement is added to the concrete at the CEMEX UK batching plant at the specific dosage required. The concrete arrives on site with the fibres evenly distributed throughout, and the process of placing concrete and reinforcement is completed in a single operation.

Benefits

Advanced Beam & Block Benefits

The need for traditional mesh in the floor slab is removed
Concrete and reinforcement is delivered as one
No wastage on site as the concrete contains the prescribed amount of fibres
Reinforcement is always placed in the correct position
Health & safety risks associated with cutting/placing steel are removed
Construction times are reduced

Applications

Advanced Beam & Block Applications

Traditional Beam & Block floors
Insulated Beam & Block floors

Request A Quote

More Advanced Beam & Block Information

Installation

CEMEX Advanced Beam & Block Concrete (MF or SF) have no special handling requirements and can be placed using conventional techniques such as direct discharge, skip or pump.

In order to achieve the best performance from Cemex Advanced Beam & Block Concrete (MF or SF) it is essential to ensure that the concrete is fully compacted and properly cured immediately after the concrete is placed and finished.

It is strongly recommend that a curing membrane is applied to prevent any moisture loss to assure that the concrete reaches its full potential.

Economical Benefits

Using CEMEX Advanced Beam & Block Concrete (MF or SF) can lead to significant cost reductions by way of: reduced labour; elimination of crane/lifting for reinforcement; faster construction and lower maintenance.

CEMEX Advanced Design is easier and quicker to place than steel mesh reinforced concrete. The Health and Safety hazards associated with handling and placing steel mesh are also significantly reduced.